Dell POWEREDGE M1000E - Manual (Page 255)

Web Tools Administrator’s Guide 227
53-1001772-01
Active Directory service management
17
DRAFT: BROCADE CONFIDENTIAL
4. Click the up and down arrows to rearrange the order of the RADIUS servers.
5. Click Apply.
Removing a RADIUS server
Use the following procedure to remove a RADIUS server.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 35.
2. Select the AAA Service tab.
3. Select a RADIUS server from the RADIUS Configuration list.
4. Click Remove.
If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the
only RADIUS server if RADIUS is the primary AAA service.
The RADIUS server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation displays, warning you that you are about to remove the selected RADIUS server.
6. Click Yes in the confirmation.
Active Directory service management
Active Directory is the directory server that holds all the user profiles. Active Directory provides user
authentication and authorization using LDAP as authentication protocol. Active Directory provides
better security while using remote authentication mechanism.
You can add, remove, and modify settings of Active Directory Server.
Enabling Active Directory service
For adding a new Active Directory server, you must provide the server IP address, port number,
secret string, timeout value, and LDAP as the authentication protocol. The server IP address may
be in either IPv4 or IPv6 format. Select Active Directory as the server type; the dialog box displays
LDAP as the only authentication protocol.
Use the following procedure to enable Active Directory service.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 35.
2. Select the AAA Service tab.
3. To enable Active Directory service, select Active Directory from the Primary AAA Service menu.
4. Select None, Switch Database when Active Directory authentication failed, or Switch Database
when Active Directory timeout from the Secondary AAA Service menu.