Using fabric watch with web tools, Figure 53, Fabric – Dell POWEREDGE M1000E User Manual
Page 200
172
Web Tools Administrator’s Guide
53-1001772-01
Using Fabric Watch with Web Tools
13
DRAFT: BROCADE CONFIDENTIAL
Using Fabric Watch with Web Tools
You do not need the EGM license to perform Fabric Watch operations using Web Tools.
NOTE
Unless the switch is a member of the current Admin Domain context, Fabric Watch is view-only.
FIGURE 53
Fabric Watch window
Fabric Watch Explorer, on the left side of the window, displays the available classes. Not all classes
are available for all switches. The status bar at the bottom of the window provides you with a
summary of recent actions, and the date and time the module was last updated.
You can use Fabric Watch to define the following configurations:
•
Configure custom threshold values on particular elements.
•
Place limits on the acceptable values of those elements and enable the custom limits
(configure threshold boundaries).
•
Configure Fabric Watch to alert you to errant values.
•
Configure Fabric Watch to identify unacceptable values (threshold traits).