Dell W5300 Workgroup Laser Printer - Manual (Page 102)

0.08...100 (in increments of 0.01 cpi)
10*
Pitch refers to the number of fixed-space characters in a horizontal inch of type. You can select a pitch from
0.08 to 100 characters per inch (cpi) in increments of 0.01 cpi. For nonscalable monospaced fonts, the pitch
is displayed, but cannot be changed.
NOTE: Pitch is only displayed for fixed, or monospaced, fonts.
See also:
Pitch and point size
Symbol Set
Purpose:
To choose a symbol set for a specified font name.
Values:
10U PC-8* (country/region-specific factory default values)
12U PC-850* (country/region-specific factory default values)
A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols used when
printing with a selected font. Symbol sets support the different requirements for languages or specific
applications, such as math symbols for scientific text. Only the symbol sets supported for the selected font
name are displayed.
See also:
Font Name
Orientation
Purpose:
To determine how text and graphics are oriented on the page.
Values:
Portrait* Prints text and graphics parallel to the short edge of the paper.
Landscape Prints text and graphics parallel to the long edge of the paper.