Dell W5300 Workgroup Laser Printer - Manual (Page 55)

75 transparencies
Print media dimensions
The multipurpose feeder accepts print media within the following dimensions:
Width-69.85 mm (2.75 in.) to 229 mm (9.01 in.)
Length-127 mm (5 in.) to 355.6 mm (14 in.)
Trouble-free printing
Load only one size and type of print media at a time in the multipurpose feeder.
To achieve the best possible print quality, use only high-quality print media that is designed for use in
laser printers. For more guidelines on print media, see
Print media guidelines .
To prevent jams, do not add or remove print media when there is still print media in the multipurpose
feeder or when the printer is printing from the multipurpose feeder.
Print media should be loaded with the recommended print side up and the top of the print media going
into the multipurpose feeder first.
Do not place objects on the multipurpose feeder. Also, avoid pressing down or applying excessive force
on it.
Do not remove any tray while a job is printing from the multipurpose feeder or Busy is displayed on the
operator panel. Doing so may cause a jam.
NOTE: The multipurpose feeder may be used with the optional envelope feeder installed.
The icons on the multipurpose feeder show you how to load the multipurpose feeder with paper, how to turn
an envelope for printing, and how to load letterhead paper for simplex and duplex printing. See
Loading
letterhead for detailed instructions on loading documents printed on letterhead.