Dell W5300 Workgroup Laser Printer - Manual (Page 99)

Off Printer does not sound an alarm.
Single* Printer sounds three quick beeps.
Continuous Printer repeats three beeps every 10 seconds.
Toner Alarm
Purpose:
To specify how the printer responds when it is out of toner.
Values:
Off* An error message is displayed until someone replaces the toner cartridge. If an Auto
Continue value is selected from the Setup Menu, the printer resumes printing after the
specified timeout value.
Single Printer stops printing, displays an error message, and sounds three quick beeps.
Continuous Printer stops printing, displays an error message, and repeats three beeps every 10 seconds
until the toner cartridge is replaced.
See also:
Auto Continue
Asset Tag
Purpose:
The asset tag number is used for printer inventory records. Enter the asset tag number that is assigned to
the printer.
NOTE: The Asset Tag menu item is only available through the Dell Printer Configuration Web Tool. For
more information, see Dell Printer Configuration Web Tool .
Dell Service Tag
Purpose:
The service tag number is required when calling for service. Enter the service tag number from the label on
the back of the printer.