Dell W5300 Workgroup Laser Printer - Manual (Page 39)

Preprinted papers that require a registration (the precise print location on the page) greater than
±0.09 in., such as optical character recognition (OCR) forms
In some cases, you can adjust registration with your software application to successfully print on these
forms.
Coated papers (erasable bond), synthetic papers, thermal papers
Rough-edged, rough or heavily textured surface papers or curled papers
Recycled papers containing more than 25% post-consumer waste that do not meet
DIN 19 309
Recycled paper having a weight less than 60 g/m 2 (16 lb)
Multiple-part forms or documents
Selecting paper
Proper paper loading helps prevent jams and ensure trouble-free printing.
To help avoid jams or poor print quality:
Always use new, undamaged paper.
Before loading paper, know the recommended print side of the paper you are using. This information is
usually indicated on the paper package.
Do not use paper that you have cut or trimmed yourself.
Do not mix print media sizes, weights, or types in the same source; mixing results in jams.
Do not use coated papers.
Do not forget to change the Paper Size setting when you use a source that does not support auto size
sensing.
Do not remove trays while a job is printing or Busy is displayed on the operator panel.
Make sure the Paper Type, Paper Texture, and Paper Weight settings are correct. (See Paper Menu for
detailed information about these settings.)
Make sure the paper is properly loaded in the source.
Flex paper back and forth. Do not fold or crease the paper. Straighten the edges on a level surface.