Dell W5300 Workgroup Laser Printer User Manual
Page 32
a.
b.
Press Menu until you see Print Menus, and then press Select to print the page. The message
Printing Menus
appears on the display.
c.
Verify the duplex unit is listed under "Installed Features."
d.
If it is not listed, turn the printer off, unplug the power cord, and reinstall the duplex unit.
e.
Update your driver by following the instructions in the table. If the printer is on the network, update
the driver for each client.
3.
Windows XP
Click Start
Control Panel
Printers and Other Hardware
Printers and
Faxes.
1.
Right-click the Dell Laser Printer W5300 icon.
2.
Click Properties
Device (or Options)
Update (or Update Now).
3.
Click OK
OK. Close the Printers folder.
4.
Windows 2000
Windows NT
4.0
Click Start
Settings
Printers.
1.
Right-click the Dell Laser Printer W5300 icon.
2.
Click Properties
Device (or Options)
Update (or Update Now).
3.
Click OK
OK. Close the Printers folder.
4.
Windows Me
Windows 95/98
Click Start
Settings
Printers.
1.
Right-click the Dell Laser Printer W5300 icon.
2.
Click Properties
Device (or Features)
Update (or Update Now).
3.
Click OK
OK. Close the Printers folder.
4.
If Update is unavailable, follow these steps:
In the Available Options list, click Duplex Option.
a.
Click Add.
b.
Click OK, and then close the Printers folder.
c.
If Update Now is unavailable, follow these steps:
In the Options list, find Duplex Option.
a.
Change the setting from Not Installed to Installed.
b.
Click OK, and then close the Printers folder.
c.
To make duplexing the default for all print jobs:
You can set up your driver so the printer always duplexes unless you say otherwise for a particular job. This
is handy if you usually print on both sides of the page (to save paper, for example).
1.