Dell W5300 Workgroup Laser Printer - Manual (Page 21)

2.
Select the Device tab, and then select the option. 3.
Click Update, and then click Apply. 4.
Connecting the printer to the network
To attach the printer to a computer:
Make sure the printer, computer, and any other attached devices are turned off and unplugged. 1.
Remove the red plug from the Ethernet port on the back of the printer. 2.
Plug one end of a standard category 5 cable into a LAN drop or hub, and the other end into the
Ethernet port on the back of the printer. The printer automatically adjusts for the network speed. 3.
2 Ethernet port
Turn on the printer
Plug one end of the printer power cord into the socket at the back of the printer and the other end into
a properly grounded outlet. 1.