Dell W5300 Workgroup Laser Printer - Manual (Page 65)

size you are loading. (See Paper Size for detailed information about this setting.)
Press Go to return to Ready.
9.
NOTE: Software settings may override operator panel settings.
If envelopes jam, see Clearing jams .
Linking trays
Tray linking enables the automatic linking feature for trays when you load the same size and type of print
media in multiple sources. The printer automatically links the trays; when one tray is empty, print media
feeds from the next linked tray.
For example, if you have the same size and type of print media loaded in tray 2 and tray 3, the printer
selects print media from tray 2 until it becomes empty, and then the printer automatically feeds print media
from the next linked tray - tray 3.
If you load the same size print media in each tray, make sure the print media is all the same type in order to
link the trays.
Once the trays you selected are loaded with the same size and type of print media, select the same Paper
Type setting in the Paper Menu for these sources.
To disable tray linking, set the Paper Type to a unique value in each one of the trays. If all the trays do not
have the same type of print media when they are linked, you could mistakenly print a job on the wrong
paper type.
Using the duplex function
Duplex printing (or two-sided printing) lets you print on both sides of a sheet of paper. For sizes that are
acceptable for duplex printing, see
Print media sizes and support .
Select Duplex from your printer driver to print individual duplex jobs.
Duplex printing on letterhead
When duplex printing on letterhead from the multipurpose feeder, load it with the logo face down and
entering the printer last.