Dell POWEREDGE 1950 - Manual (Page 60)

60 Installing System Components
RAID Battery
Installing a RAID Battery
1 Locate the RAID battery pocket on the chassis that is adjacent to hard drive bay 0. See Figure 3-11.
2 Insert the battery in the battery pocket.
3 Connect the battery cable to the RAID controller daughter card. See Figure 3-11.
Figure 3-11. Installing a SAS RAID Battery
Removing a RAID Battery
1 Disconnect the RAID battery cable from the SAS RAID daughter card. See Figure 3-11.
2 Press the release latch toward the hard-drive bays and remove the battery from the battery pocket.
1 RAID battery 2 SAS RAID daughter card
battery connector 3 release latch
1
2
3