Ane, see figure 3-23 – Dell POWEREDGE 1950 User Manual
Page 84
Advertising
84
Installing System Components
6
Remove the backplane board:
–
If you are removing a 3.5-inch hard drive (two-drive) backplane, press the release latch at the left end
of the board, slide the board to its right, and lift the backplane off of the securing tabs. See
Figure 3-23.
–
If you are removing a 2.5-inch hard drive (four-drive) backplane, press the release latch at each end of
the backplane and lift the backplane off of the securing tabs. See Figure 6-4.
Figure 3-23.
2.5-Inch Hard Drive Backplane Board Removal and Installation
1
backplane board release latch
2
backplane board
3
securing slots
4
securing tabs
5
SAS interface cable
6
power cable
1
6
5
2
4
3
Advertising