Dell PowerEdge RAID Controller S110 - Manual (Page 25)

RAID Configuration and Management 23
4
RAID Configuration and
Management
The Dell PowerEdge PERC S110 RAID Controller is configured by using the
PERC S110 BIOS Configuration Utility. The utility is accessed at system
startup, when you are prompted to press <Ctrl><R>.
NOTE: To configure the PERC S110 with Dell OpenManage Server Administrator
Storage Management, see the Dell Support website at dell.com/support/manuals.
NOTE: The PERC BIOS Configuration Utility can be accessed and configured
without the operating system and controller drivers being installed.
Configuring the Controller: Using the PERC BIOS
Configuration Utility
PERC BIOS Configuration Utility Operations
• Accessing the PERC BIOS Configuration Utility
Describes how to log onto the PERC Virtual Disk Management utility.
• Understanding the Text Colors in the PERC BIOS Configuration Utility
Describes the status of the physical disks and virtual disks, based on the
color-highlighted text.
• Initializing Physical Disks
Describes how to initialize a physical disk for data storage.
• Creating Virtual Disks
Describes how to create a virtual disk from the connected physical disks.
• Deleting Virtual Disks
Deletes one or more virtual disks that are configured for the controller.
• Swapping two Virtual Disks
Swaps virtual disks to enable them to load in any order.
A5_bk0.book Page 23 Thursday, May 29, 2014 11:37 AM