Dell PowerEdge RAID Controller S110 - Manual (Page 56)

54 Appendix A
Controller Tasks
Table 1-2 indicates the tasks that are supported or not supported by the
PERC S110 adapter at the PERC BIOS Configuration Utility.
Dell-compliant SATA compatibility Yes
Dell-compliant SAS compatibility No
Dell-supported direct-connected
end devices
Dell-compliant physical disks
*SMART error support through
management applications
Yes
NOTE: SMART drives are not allowed in VD
configuration.
Backplane supported systems Yes
Software-based RAID Volume, RAID 1,
RAID 0, RAID 5,
RAID 10
Maximum number of virtual disks 8
Support for internal tape drive
Yes
Support for hot spare Yes
Maximum number of hot spares Varies with the number of free disks in the system
Table 1-2. PERC S110 Adapter Tasks
PERC S110 Adapter Tasks Supported by PERC S110 Adapter
Enable alarm No
Disable alarm No
Quiet alarm No
Test alarm No
Set check consistency rate No
Rescan controller Yes
Create virtual disk Yes
Table 1-1. Specifications for the PERC S110 adapter
Specification PERC S110 adapter
A5_bk0.book Page 54 Thursday, May 29, 2014 11:37 AM