Dell PowerEdge RAID Controller S110 - Manual (Page 8)

6 Overview
Memory
512MB or greater.
Physical Disk
At least one SATA hard disk drive (HDD) or SATA solid state drive (SSD).
NOTE: The PERC S110 controller supports cabled configurations of up to four SATA
HDD or four SATA SSD physical disks.
• SATA-II HDD physical disks can be used with a PERC S110 adapter.
• SATA-II SSD physical disks can be used with a PERC S110 adapter.
Operating Systems
• Microsoft Windows Server 2012 R2
• Microsoft Windows Server 2012
• Microsoft Windows Server 2008 R2 (64-bit), including Hyper-V
virtualization
• Microsoft Windows Server 2008 (64-bit), including Hyper-V virtualization
• Microsoft Windows Server 2008 (32-bit)
NOTE: For the latest list of supported operating systems and driver installation
instructions, see the system documentation at dell.com/support/manuals. For
specific operating system service pack requirements, see the Get drivers and
downloads section of the system documetation page at dell.com/support.
Supported Devices
PERC S110 adapter supports Dell-supported SATA-based tape devices and
SATA optical disk devices.
NOTE: The PERC S110 adapter supports system boot to a tape using an internal Dell
RD1000 tape device. Select Continue while in the BIOS Configuration Utility
(<Ctrl><R>) for RD1000 to remain first in the boot order. The RD1000 option goes to
the end of the boot order listing if <Ctrl><Alt><Del> is selected and you would not
be able to boot to it.
A5_bk0.book Page 6 Thursday, May 29, 2014 11:37 AM