Dell PowerEdge RAID Controller S110 - Manual (Page 39)

RAID Configuration and Management 37
Controller Management
The Controller Management menu can be used to perform the following
controller-level functions. Each of these functions is its own selectable menu
option.
• View Controller Information: To display information about the controller.
•
Change Controller Properties: To update controller properties and/or
restore factory defaults for the controller:
a Set Bootable Device
b Enable BIOS Stop On Error
• Convert to Non-RAID Disk: To convert the RAID Capable physical disks
to Non-RAID physical disks.
• Convert to RAID Capable Disk: To convert the physical disks to RAID
Capable physical disks.
• Rescan Disks: To rescan the physical disks to detect and display new or
removed physical disks or virtual disks.
NOTE: The help text for all of the options can be viewed by clicking Help on the top
right-hand corner of the browser screen. Help text for individual option menus can
also be viewed by simply scrolling down on each option.
Virtual Disk Management
The Virtual Disk Management menu can be used to create and manage
virtual disks on the controller. The following functions can be performed
under Virtual Disk Management. Each of these functions is its own selectable
menu option.
• Create Virtual Disk: To create a virtual disk by selecting the RAID level,
physical disks, and virtual disk parameters.
• Manage Virtual Disk Properties: To display and manage virtual disk
properties, view associated physical disks and manage dedicated hot
spares.
• Select Virtual Disk Operations: To select and execute a delete virtual disk
operation.
• View Virtual Disk Properties: To display virtual disk properties, including
cache policies, for a selected virtual disk and list the associated physical
disks.
A5_bk0.book Page 37 Thursday, May 29, 2014 11:37 AM