Hard drive, Removing a hard drive – Dell OptiPlex GX280 User Manual
Page 252
Hard Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
NOTICE:
To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a
foam pad, that will sufficiently cushion it.
1. If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this
procedure.
2. Check the documentation for the drive to verify that it is configured for your computer.
Removing a Hard Drive
1. Follow the procedures in "
NOTE:
Since the following steps do not require the complete removal of the CD/DVD drive and the floppy drive, it is
not necessary to disconnect the cables connecting the two drives.
2.
from the bay and carefully set it aside.
3.
from the bay and carefully set it aside.
4. Press in on the two securing clips on each side of the drive and slide the drive towards the back of the computer.
NOTICE:
Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the
cable connectors.
5. Lift the drive out of the computer and disconnect the power and hard-drive cables from the drive.