Dell OptiPlex GX280 - Manual (Page 35)

the system board is
in the enabled
position (the
default).
If the option is to
Disabled, the
admin password is
disabled by a
jumper setting on
the system board.
To disable the
admin password,
enter the password
at the prompt and
hit <Ctrl><Enter>.
System
Password
Displays the current
status of the
system's password
security feature and
allows a new system
password to be
assigned and
verified. The
settings are Set,
Not Set, and
Disabled.
If the option is to
Set, a system
password is
assigned.
If the option is to
Not Set, no system
password is
assigned and the
password jumper on
the system board is
in the enabled
position (the
default).
If the option is to
Disabled, the
system password is
disabled by a
jumper setting on
the system board.
To disable the
system password,
enter the password
at the prompt and
hit <Ctrl><Enter>.
Drive
Password
Set this password to
prevent
unauthorized users
from accessing the
hard drive.
NOTE: The option
appears for each
installed hard drive.
This option locks the
system password