Pci and pci express cards and serial port adapters, Pci cards, Installing a pci card – Dell OptiPlex GX280 User Manual
Page 349
PCI and PCI Express Cards and Serial Port Adapters
Dell™ OptiPlex™ GX280 Systems User's Guide
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.
Your Dell™ computer supports a serial adapter and provides the following connectors for PCI and PCI Express cards.
two
NOTE:
Your Dell computer uses only PCI and PCI Express slots. ISA cards are not supported.
PCI Cards
Installing a PCI Card
1. Follow the procedures in "
2. Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in
the open position.
3. If you are installing a new card, remove the filler bracket to create a card slot opening. Then continue with step 5.
4. If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any
cables connected to the card.
5. Prepare the new card for installation.
NOTE:
See the documentation that came with the card for information on configuring the card, making internal
connections, or customizing it for your computer