Dell OptiPlex GX280 - Manual (Page 300)

1 drive
2 bracket rails (2)
3 screws (4)
2. Gently slide the drive into place until you hear a click or feel the drive securely installed.
3. Attach the power and floppy-drive cables to the floppy drive.
4. Connect the other end of the floppy-drive cable to the connector labeled "DSKT" on the system board .
1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
5. If you are installing a new floppy drive rather than replacing a drive, remove the front-panel inserts .
6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
7. Close the computer cover.
NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the