Dell OptiPlex GX280 User Manual
Page 318
a. Press the tab on the green securing clip to remove the clip from the retention base.
NOTE:
Your computer's configuration determines the type of heat sink that is installed in your computer. Both
types of heat sinks (a taller version and a shorter version) may differ in appearance than illustrated below, but
are removed and reinstalled in the same manner.
1 securing clip
2 tab
3 retention base
b. Remove the heat sink by pressing the tab while lifting one end of the heat sink.
NOTICE:
Lay the heat sink down with the thermal material facing upward.
NOTE:
Your computer's configuration determines the type of heat sink that is installed in your computer. Both types of
heat sinks (a taller version and a shorter version) may differ in appearance than illustrated below, but are removed and
reinstalled in the same manner.