Installing a sas backplane, 1 install the sas backplane, See figure 3-35 – Dell POWEREDGE R710 User Manual

Page 147

Advertising
background image

Installing System Components

147

Figure 3-35.

Removing and Installing a SAS Backplane

Installing a SAS Backplane

1 Install the SAS backplane:

a

Lower the backplane into the system, being careful to avoid damaging
components on the face of the board.

b

Align the slots in the backplane with the retention hooks on the back
of the drive bays, then move the backplane forward until the retention
hooks fit through the slots in the backplane. See Figure 3-35.

1

drive bays

2

SAS backplane board

3

power cable from system board

4

SAS A cable

5

SAS B cable

6

securing slots (8)

7

securing tabs (7)

8

SAS backplane board release tab

1

7

4

8

3

2

5

6

Advertising