System messages, Table 1-2. system messages – Dell POWEREDGE R710 User Manual

Page 37

Advertising
background image

About Your System

37

System Messages

System messages appear on the screen to notify you of a possible problem
with the system.

NOTE:

If you receive a system message not listed in the table, check the

documentation for the application that is running when the message appears or the
operating system's documentation for an explanation of the message and
recommended action.

Table 1-2.

System Messages

Message

Causes

Corrective Actions

128-bit Advanced

ECC mode

disabled. For

128-bit Advanced

ECC, DIMMs must

be installed in

pairs. Pairs must

be matched in

size and

geometry.

The Advanced ECC option
was enabled in BIOS, but is
no longer valid due to an
unsupported memory
configuration, possibly a
faulty or removed memory
module. The Advanced ECC
setting has been disabled.

Check other messages for a
faulty memory module.
Reconfigure the memory
modules for Advanced ECC
mode. See "System Memory."

Alert! Advanced

ECC Memory Mode

disabled! Memory

configuration

does not support

Advanced ECC

Memory Mode.

Advanced ECC Memory
Mode was enabled in the
system setup program, but
the current configuration
does not support Advanced
ECC Memory Mode. A
memory module may be
faulty.

Ensure that the memory
modules are installed in a
configuration that supports
Advanced ECC Memory
Mode. Check other system
messages for additional
information for possible
causes. For memory
configuration information,
see "General Memory
Module Installation
Guidelines." If the problem
persists, see
"Troubleshooting System
Memory."

Advertising