Dell POWEREDGE R710 - Manual (Page 95)

Installing System Components
95
6 Reinstall all expansion cards in expansion-card riser 1. See "Installing an
Expansion Card."
7 Close the system. See "Closing the System."
8 Reconnect the system and peripherals to their power sources, and turn
them on.
Figure 3-10. Removing and Installing the iDRAC6 Enterprise Card
Removing an iDRAC6 Enterprise Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System."
1 iDRAC6 Enterprise card 2 VFlash media slot
3 VFlash SD card 4 RJ-45 Ethernet port (underneath
card)
5 retention standoff posts (2) 6 iDRAC6 Enterprise card connector
2
6
1
5
4
3