Dell PowerEdge C5230 - Manual (Page 106)

106 Installing System Components
Supported Memory
Removing a Memory Module
1 Remove the sled from the system. See "Removing a Sled" on page 102.
NOTE: Only Intel Xeon E3-1200v3 family of products support 1600 MHz memory.
Supported Memory
Configura-
tion
Memory Type/Size CPU DIMM
s
Type Memory
Speed
(MHz)
Rank Type
(x8, x4)
Component
Density
Total
Size
DIMM Slot
A1 A0 B1 B0
12 sled DDR3 ECC
UDIMM/4096 MB*1
1 1 VLP
UDIMM
1600 2R x8 2GB 4G •
12 sled DDR3 ECC
UDIMM/4096 MB*2
1 2 VLP
UDIMM
1600 2R x8 2GB 8G • •
12 sled DDR3 ECC
UDIMM/2048
MB*2+4096 MB*3
1 3 VLP
UDIMM
1600 2R x8 2GB 12G • • •
12 sled DDR3 ECC
UDIMM/4096 MB*4
1 4 VLP
UDIMM
1600 2R x8 2GB 16G • • • •
12 sled DDR3 ECC
UDIMM/8912MB*1
1 1 VLP
UDIMM
1600 2R x8 4GB 8G •
12 sled DDR3 ECC
UDIMM/8912MB*2
1 2 VLP
UDIMM
1600 2R x8 4GB 16G • •
12 sled DDR3 ECC
UDIMM/8912MB*3
1 3 VLP
UDIMM
1600 2R x8 4GB 24G • • •
12 sled DDR3 ECC
UDIMM/8912MB*4
1 4 VLP
UDIMM
1600 2R x8 4GB 32G • • • •
12 sled DDR3 ECC
UDIMM/8912MB*2
+4096MB*2
1 4 VLP
UDIMM
1600 2R/2R x8 4GB/2GB 24G 8GB 8G 4G 4G
WARNING: The memory modules are hot to touch for some time after the system
has been powered down. Allow time for the memory modules to cool before
handling them. Handle the memory modules by the card edges and avoid touching
the components on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.