Dell PowerEdge C5230 - Manual (Page 34)

34 Using the System Setup Program
Embedded Network Devices
Figure 2-12. Embedded Network Devices Screen
Menu Fields Settings Comments
Advanced\PCI Configuration\Embedded Network Devices
Embedded NIC1
Disabled
Enabled with PXE*
Enabled without PXE
iSCSI Remote Boot Disable/Enable the
system's primary embedded
network interface
controller (full-function),
w/, w/o including its PXE
boot-ROM or with iSCSI
Remote Boot. To disable
NIC1, NIC2 should be
disabled first. If iSCSI is
enabled, UEFI PXE can
not boot.