Dell PowerEdge C5230 - Manual (Page 93)

Using the System Setup Program 93
WARN_CLTT_MIN
OR_NO_TEMP_
SENSOR 01h NODE CH DIMM X A DIMM without
Temp Sensor was
found
WARN_CLTT_MIN
OR_CIRCUIT_TST
_FAILED 02h NODE CH DIMM X A DIMM failed
Temp Sensor
circuit test
WARN_THROT_IN
SUFFICIENT 19h NODE CH DIMM X Indicates
throttling is not
sufficient for this
DIMM due to
MRC calculation.
WARN_CLTT_DIM
M_UNKNOWN 1Ah NODE CH DIMM X A DIMM of an
unknown category
is found when
looking up a
predefined
category table
(DIMM type,
rawcard, heat
spreader, planner,
etc). Use a default
category (category
11 or 27
depending on
DIMM type)
WARN_DQS_TEST 1Bh X X X X DQS training
failure
encountered
WARN_MEM_TES
T 1Ch NODE CH DIMM X Hardware
Memtest failed
and the DIMM is
disabled
WARN_CLOSED_P
AGE _OVERRIDE 1Dh TBD: not
currently in use.
Table 2-16. MRC Warning Code
Warning Major
Code Minor
Code Data (DWord) Descriptions
31:16 15:0 31:24 23:16 15:8 7:0