Dell PowerEdge C5230 - Manual (Page 35)

Using the System Setup Program 35
Embedded NIC2 Disabled
Enabled with PXE
Enabled without PXE*
iSCSI Remote Boot Disables/Enables the
system's secondary
embedded network
interface controller (full-
function), w/, w/o including
its PXE boot-ROM or with
iSCSI Remote Boot. If
iSCSI is enabled, UEFI
PXE can not boot.
iSCSI Configuration Configure the iSCSI
parameters. This page
appears and allows to setup
while boot mode is set to
UEFI mode and one of
NIC1 and NIC2 is set to
iSCSI Remote Boot.
Menu Fields Settings Comments