Dell PowerEdge C5230 User Manual
Page 79
Using the System Setup Program
79
ACPI/ASL Checkpoints
OEM-Reserved Checkpoint Ranges
8
Platform PCI resource requirements cannot be met
Table 2-11. ACPI/ASL Checkpoints
Status Code
Description
0x01
System is entering S1 sleep state
0x02
System is entering S2 sleep state
0x03
System is entering S3 sleep state
0x04
System is entering S4 sleep state
0x05
System is entering S5 sleep state
0x10
System is waking up from the S1 sleep state
0x20
System is waking up from the S2 sleep state
0x30
System is waking up from the S3 sleep state
0x40
System is waking up from the S4 sleep state
0xAC
System has transitioned into ACPI mode. Interrupt controller
is in APIC mode.
0xAA
System has transitioned into ACPI mode. Interrupt controller
is in APIC mode.
Table 2-12. OEM Reserved Checkpoint Ranges
Status Code
Description
0x05
OEM SEC initialization before microcode loading
0x0A
OEM SEC initialization after microcode loading
0x1D – 0x2A
OEM pre-memory initialization codes
Table 2-10. DXE Beep Codes
(continued)
# of Beeps
Description