Heat sinks, Removing a heat sink/shroud – Dell PowerEdge C5230 User Manual
Page 119
Installing System Components
119
Heat Sinks
The following procedures illustrate removal and installation of the heat
sink/shroud.
Removing a Heat Sink/Shroud
1 Remove the required sled from the system. See "Sled Configuration" on
2 Loosen the four captive screws on the heat sink .
Table 3-1. Processors Requiring a Heat Sink/Shroud
Series
Processor
Intel Xeon E3-1200v3
product family
Intel Xeon E3-1280v3
Intel Xeon E3-1240v3
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.