Computer cover, Computer cover -4, Figure 6-2 – Dell OptiPlex NX1 User Manual
Page 120: Computer cover removal -4, Rpsxwhu&ryhu
6-4
Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC Systems Service Manual
&RPSXWHU&RYHU
)LJXUH &RPSXWHU &RYHU 5HPRYDO
To remove the computer cover, follow these steps:
1.
Turn off power to all peripherals, and disconnect the AC power cable from
its electrical outlet.
2. Remove the padlock if one is installed.
3. Facing the left side of the computer, press the release button at the
bottom-left corner of the front bezel.
4. Lift the bottom of the cover, allowing it to pivot up toward you.
5. Disengage the tabs that secure the cover to the top of the chassis, and lift
the cover away.
Before you reinstall the cover, fold all cables out of the way so that they do not
interfere with the cover or with proper airflow inside the computer.
release button