Optional stand, Optional stand -4, Figure 5-2 – Dell OptiPlex NX1 User Manual
Page 96: Optional-stand removal -4, 2swlrqdo6wdqg
Advertising
5-4
Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC Systems Service Manual
2SWLRQDO6WDQG
)LJXUH 2SWLRQDO6WDQG 5HPRYDO
To remove the optional stand, follow these steps:
1.
Place the right side of the computer on a flat work surface.
2. Unscrew the optional-stand screw.
Use your fingers or a wide flat-blade screwdriver to unscrew the optional-
stand screw.
3. Pull the optional stand away from the computer.
Disengage the three orientation nubs that position and help hold the
optional stand to the computer.
optional-stand screw
Advertising