Computer cover, Computer cover -4, Figure 4-2 – Dell OptiPlex NX1 User Manual
Page 74: Computer cover removal -4, Rpsxwhu&ryhu
4-4
Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC Systems Service Manual
&RPSXWHU&RYHU
)LJXUH &RPSXWHU &RYHU 5HPRYDO
To remove the computer cover, follow these steps:
1.
Turn off power to all peripherals, and disconnect the AC power cable from
its electrical outlet.
2. Remove the padlock if one is installed.
3. Press in on the two securing buttons until the cover is free to swing up.
4. Raise the back of the cover, and pivot it toward the front of the computer.
5. Lift the cover off of the hooks at the front of the chassis.
Three plastic hooks on the inside-front part of the cover secure it to the
chassis.
Before you reinstall the cover, fold all cables out of the way so that they do not
interfere with the cover or with proper airflow inside the computer.
securing
buttons (2)
front of computer