Inch diskette drive assembly -11, Figure 6-9, Inch diskette-drive assembly removal -11 – Dell OptiPlex NX1 User Manual
Page 127
Advertising
Removing and Replacing Parts on the Mini Tower Chassis
6-11
,QFK'LVNHWWH'ULYH$VVHPEO\
)LJXUH ,QFK 'LVNHWWH'ULYH $VVHPEO\ 5HPRYDO
To remove a 3.5-inch diskette drive assembly, follow these steps:
1.
Disconnect the DC power cable and the interface cable from the back of
the 3.5-inch diskette drive.
2. Press the retaining-tab release button, and pull the drive assembly forward
to remove it.
3. Remove the drive-mounting screw from the left side of the drive, and
remove the drive from the bracket (see Figure 6-10).
retaining-tab
release button
Advertising