Computer cover, Computer cover -5, Figure 5-3 – Dell OptiPlex NX1 User Manual
Page 97: Computer cover removal -5, Rpsxwhu&ryhu
Advertising
Removing and Replacing Parts on the Midsize Chassis
5-5
&RPSXWHU&RYHU
)LJXUH &RPSXWHU &RYHU 5HPRYDO
To remove the computer cover, follow these steps:
1.
Turn off power to all peripherals, and disconnect the AC power cable from
its electrical outlet.
2. Press in on the two securing buttons until the cover is free to swing up.
3. Raise the back of the cover, and pivot it toward the front of the computer.
4. Lift the cover off the hooks at the front of the chassis.
Four plastic hooks on the inside-front part of the cover secure it to the
chassis.
Before you reinstall the cover, fold all cables out of the way so that they do not
interfere with the cover or with proper airflow inside the computer.
securing
buttons (2)
front of computer
Advertising