Dell OptiPlex NX1 - Manual (Page 167)

System Setup Program A-7
When determining the order of devices to boot from, the system first consid-
ers the order of the devices listed under the Device Controller Priority option,
then the order of devices under Boot Device Priority.
To specify your priority preferences, order the devices under these categories
so that the highest-priority controller is at the top of the Device Controller
Priority option and the highest-priority device is at the top of the Boot Device
Priority option. Order the remainder of the devices in the Boot Device Prior-
ity option according to your preferences. Move any devices that you want the
system to ignore during system start-up into the Exclude From Boot Device
Priority option.
NOTE: The system defines Hard Drive C: in the Boot Device Priority option
as the first hard-disk drive attached to the highest-priority device controller.
Therefore, if you have a SCSI adapter installed in your computer and you want
the SCSI drive 0 to be drive C, you must move the SCSI adapter item to the top
of the Device Controller Priority option.
To change the order of the devices, press <Ctrl> and the up- or down-arrow
key. If you want to revert to the original Boot Device Priority option settings,
press <Ctrl><Del>.
NOTE: If you exit the Device List option by pressing <Esc> or <Alt><b> with-
out making any changes, the Boot Sequence option is set to the Device List
option.
)LJXUH $ 6DPSOH 'HYLFH /LVW 6FUHHQ
Ctrl return Ctrl move item ,
Boot Device Priority:
Diskette drive A
LANDesk Service Agent for 3C090X
Hard drive C:
CD-ROM device
Level 2 Cache:
System Memory:
Video Memory:
Service Tag:
Asset Tag:
Dell Computer Corporation (www.dell.com)
Device List System OptiPlex GX1 400 Setup
Ctrl-Del original list
Exclude from Boot Device Priority:
Ctrl-Ins move to other list
The DEVICE LIST contains devices
that may be bootable. The system
attempts to boot from the devices in the
list as ordered. If you
ESC or ALT-B from this menu, the
displayed order becomes the boot
selection.
Ctrl-Ins moves items between “Boot
Device Priority” and “Exclude
from Boot Device Priority” only.
BIOS Version: XXX
512 KB Integrated
32 MB SDRAM
4 MB SGRAM
XXXXX
XXXXX
Pentium ® II Processor 400 MHz Device Controller Priority:
System BIOS boot devices
PgDn next 1 of 2 PgUp prev