Dell OptiPlex NX1 - Manual (Page 99)

Removing and Replacing Parts on the Midsize Chassis 5-7
)URQW3DQHO,QVHUWV
)LJXUH  )URQW3DQHO ,QVHUW 5HPRYDO
To remove a front-panel insert, follow these steps:
1. Lay the computer cover upside down on a flat work surface, with the front
of the cover facing you.
2. From the front of the cover, use your thumbs to push inward on the insert
until it slides off the two posts.
To replace a 5.25-inch front-panel insert, position the two ring-tabs over the
posts on the inside of the bay opening, and then press the ring-tabs over the
posts. If necessary, use a
1/4 -inch nutdriver to help push on the ring-tabs.
ring-tabs (2)
posts (2)
computer cover
(upside down)
5.25-inch
front-panel
insert