Two Brothers Racing BMW K1300S - Manual (Page 2)

V.A.L.E.
V A R I A B L E A X I S L O C K I N G E X H A U S T
TM
2009 BMW
R1300S
Slip-On Exhaust System
Part # 005-2650406V / 005-2650407V / 005-2650408V
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place.
For cleaning use a mild spray cleaner. Always apply cleaner or
polish with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will turn
a light golden hue after a few heat cycles, this is a normal charac-
teristic of high quality stainless steel.
Carbon Fiber Mufflers: Always make sure the fiberglass packing
inside is in good condition and not burned out, as exhaust heat
inside an empty canister will deteriorate the Carbon Fiber sleeve.
TBR sells repack kits (TBR part # 005-10038) that include new riv-
ets and repack material as well as a drill bit (#30), making it easy
to do yourself. Also, NEVER dyno test your bike with carbon fiber
mufflers installed - the intense heat and lack of cooling air can
quickly cause the CF material to burn. Two Brothers Racing does
not provide a warranty for burned carbon fiber.
Aluminum Mufflers: Use an aluminum or mag wheel polish such
as Mother’s to restore the bright finish to factory spec.
Qty. Description Part Number
1 Muffler Canister Varies
1 Muffler Canister Clamp Varies
1 Stainless Steel S-bend Tube 005-26504S
1 HARDWARE KIT 005-265-3
1 X-Ring Kit 005-7-2-3KIT
4 6x14mm Socket Head Cap Screws 005-SH614
1 TBR Sticker Kit 015-10212