S1000rr, 2010 bmw – Two Brothers Racing BMW S1000RR User Manual
Page 2
Installation Instructions
2010 BMW
S1000RR
FullExhaust System
Part# 005-2810106V-B / 005-2810107V-B / 005-2810108V-B
10. Un-plug both left and right O2 sensors.
11. Remove radiator clips from both radiator and oil cooler.
12. Remove both rear mounting exhaust bolts from rear of
header pipe.
13. Remove oil cooler support.
14. Remove radiator top bolt and dislodge radiator to allow for
better access to headers.
15. Remove header bolts and then remove header assembly.
16. Install left and right O2 sensors on header prior to install.
17. Install header assembly making sure to re-use the OEM
gasket between header and cylinder head.
18. Tighten all header bolts.
19. Plug-in O2 sensors and route cables away from headers
through stock retaining clips.
20. Re-install oil cooler brace and secure in place with OEM
hardware. Re-install radiator and clips.
21. Remove right side passanger foot peg.