Two Brothers Racing Honda CRF450X User Manual

V.a.l.e, Crf 450x

Advertising
background image

V.A.L.E.

V a r i a b l e a x i s l o c k i n g e x h a u s t

TM

IMPORTANT - PLEASE READ CAREFULLY

Warranty

two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualified

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions first before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Installation Instructions

1. Make sure the bike is completely cool before starting the

installation. Make sure the bike is secure on a centerstand
or ideally a service lift.

2. Remove right side rear plastic.

3. Remove lower mounting bolt.

4. Remove upper muffler mounting bolt and muffler assembly.

5. Use the 4 (four) 6x14mm socket head cap screws and lock

washers to loosely attach the X-Lite™ ring to muffler inlet.

Qty.

Description

Part Number

1

CRF450X Muffler Canister M-7 Aluminum

005-133-206M

1

CRF450X SS Slip-on Tube

005-13301S

1

HARDWARE KIT

005-133-3

1

X-Ring Kit

005-7-2-3KIT

1

8x25mm Flange Bolt

005-FB825

1

TBR Script Logo Yellow Decal 4”

015-10212

1

Spark Arrestor (Installed)

005-106S

6. Slip S-bend tube of V.A.L.E. muffler assembly into head pipe.

7. Attach muffler mounting bracket to mounting tab on subframe

using supplied 8x25mm bolt. Leave loose for now.

8. Using OEM bolt, secure muffler assembly mid-pipe bolt.

Tighten securely.

9. Securely tighten the 4 (four) 6x14mm hex head bolts of the

V.A.L.E. assembly.

2005-09 Honda

CRF 450X

V.A.L.E.™ Slip-on Exhaust System with M-7 Aluminum Canister
Part # 005-1330406V

Parts List

Continued on page 2

Advertising