Two Brothers Racing Honda NC700X User Manual

Nc700x, Honda

Advertising
background image

Parts List

Installation Instructions

1. Make sure the bike is completely cool before

starting the installation. Make sure the bike is
secure on a centerstand or ideally a service lift.

2. Remove the OEM muffler assembly.

3. Install Muffler bracket using OEM muffler bolt.

4. Attach the TBR slip-on tube to muffler using the 4

6x20mm socket head cap screws and 6mm split
washers provided. Leave loose for now.

5. Slide barrel clamp on the end of the slip-on tube.

6. Install the TBR muffler assembly to the

motorcycle using the supplied 8x16mm socket
head bolt and 8mm flange nut.

7. Check muffler position and alignment. When it

is correct, tighten the 4 6x20mm socket head cap
screws, the barrel clamp, and muffler clamp.

8. Double check your work.

9. Before you run the bike, clean off all fingerprints

and dirt, as any oily residue will etch the metal
and become somewhat permanent when the
system gets hot. Run the bike and enjoy. It is
normal for some white smoke to appear the
first time you start the bike. This is packing/
manufacturing oil from inside the pipe burning
off. Check for gaps or leaks. If you find a leak, a
little high temperature silicon sealant should fix
it. After 50 to 100 miles, recheck all fasteners for
tightness.

Qty.

Description

Part Number

1

14” Muffler

Varies

1

X-Ring Kit Black

005-7-2-3KIT

1

8x16mm Socket Head Cap Screw

005-SH816

1

Barrel Clamp

005-27-57MSH

1

TBR Large Decal Kit

015-10212

1

Honda NC700 Bracket

005-325-B

1

8mm Flange Nut

005-FN8

1

NC700 Slip Tube

005-32504S

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualified

motorcycle technician. If you have any doubts as to your ability to

install this performance part, please consult with your local motorcycle

dealer. Read all instructions first before starting installation. Make sure

the motorcycle and exhaust system are completely cool before starting

the installation. Also, make sure the bike is secure on a centerstand

or ideally a service lift during installation. Be sure to save all stock

components for possible use later.

Care & Cleaning

Care & Cleaning

Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is

completely cool before maintenance.

Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a

few heat cycles, this is a normal characteristic of high quality stainless steel. Clean using a mild

water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.

Titanium Header System: Polished titanium pipes will experience color shift ranging from

deep blue/purple through amber after a few heat cycles. This is a normal characteristic of high

quality titanium. Clean using a mild water based spray cleaner. Always apply cleaner or polish

with a soft, clean cloth.

Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the bright

finish to factory spec.

Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always apply

cleaner or polish with a soft, clean cloth.

Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply cleaner

or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good

condition and not burned out, as exhaust heat inside an empty canister will deteriorate the

carbon fiber sleeve.

TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you

need to easily do it yourself.

Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply cleaner

or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good

condition and not burned out, as exhaust heat inside an empty canister will deteriorate the

carbon fiber sleeve.

TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you

need to easily do it yourself.

Repack all road canisters every 3,000 miles. Part #005-10038

Repack all offroad canisters after every 10 hours of use. Part #005-10038MX

NEVER dyno test your bike with carbon fiber or titanium canisters installed - the intense heat

and lack of cooling air can quickly burn through the canister material. Two Brothers Racing does

not provide a warranty for burned canisters.

Honda

nc700X

Slip-on Exhaust System with M-2 Canister
Part # 005-32504

Advertising