Two Brothers Racing Kawasaki ZX-636R/6RR - Manual

1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or
ideally a service lift.
2. Remove the seat to expose the hexagonal cable stay (Fig. 1).
3. Remove the retaining screw (a) and cable stay (b) (Fig.2).
4. There is a line inscribed on the top surface of the servo shaft. Make sure that this line is facing away from the stop
block. (Fig. 3) If necessary, the shaft can be rotated by momentarily turning the ignition key to engage the electrical
system. When the line reaches the correct position, disengage the electrical system.
2005_zx6r/6rr_FI_fix
2005 Kawasaki
ZX6R/RR Dual V.A.L.E. TM
Slip-on Exhaust System
Fuel Injector Light Fix
Qty. Description
1 Billet aluminum cable stay replacement
1 5mm x 10mm socket head cap screw
We recommend that this performance part be installed by a qualified motorcycle technician. If you have any
doubts as to your ability to install this performance part, please consult with your local motorcycle dealer. Read
all instructions first before starting installation. Make sure the motorcycle and exhaust system are completely
cool before starting the installation. Also, make sure the bike is secure on a centerstand or ideally a service lift
during installation. Be sure to save all stock components for possible use later.
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is” without warranty. Two Brothers Racing specifically disclaims
any warranties of merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the
use of these products or parts.
Warranty
Parts List
IMPORTANT - PLEASE READ CAREFULLY
Installation Instructions
a b
Fig. 1 Fig. 2
Fig. 3