Two Brothers Racing Kawasaki ZX-10R User Manual
V.a.l.e, Zx-10r v3, 2011 kawasaki
7. Install supplied mounting bracket as shown to the
preinstalled supplied bolt, retain with supplied nut and
8x20mm bolt on the lower hole.
8. Attach TBR muffler to slip-on tube using the 4 6x20mm
S.H.C.S. and lock washers provided. Leave loose for now.
9. Slide supplied barrel clamp on end of slip tube where it will
meet OEM headpipe. Fit loosely onto bike.
Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install
this performance part, please consult with your local motorcycle dealer.
Read all instructions first before starting installation. Make sure the
motorcycle and exhaust system are completely cool before starting the
installation. Also, make sure the bike is secure on a centerstand or ideally
a service lift during installation. Be sure to save all stock components for
possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
2. Remove rear passenger seat and tail cover.
3. Remove main seat.
4. Remove exhaust valve cables from servo under seat. Place
a wrench around servo so it does not move.
5. Remove OEM muffler assembly with servo cables.
6. Remove lower right footpeg bolt and replace with supplied
8x35mm bolt.
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
2011 Kawasaki
ZX-10R V3
V.A.L.E.™ Slip-on V3 Exhaust System with M-2 Canister
Part # 005-2990406V3, 005-2990407V3, 005-2990408V3
Qty. Description
Part Number
1
Muffler Canister
005-146-207
1
Slip-on Tube
005-29904SV3
1
HARDWARE KIT
005-299-5
1
X-Ring Kit
005-7-2-3KIT
1
Barrel Clamp
005-27-66MSH
1
Mounting bracket
005-299-19
1
8x35mm Bolt
005-SH835
2
8x20mm Bolt
005-SH820
2
8mm Flange Nut
005-FN8
1
TBR Sticker Kit
015-10212