Two Brothers Racing Suzuki Bandit 1200 - Manual (Page 2)

Installation Instructions
Care & Cleaning / Warranty
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning use a
mild spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Carbon Fiber Mufflers: Always make sure the fiberglass packing inside is in good con-
dition and not burned out, as exhaust heat inside an empty canister will deteriorate
the Carbon Fiber sleeve. TBR sells repack kits (TBR part # 005-10038) that include new
rivets and repack material as well as a drill bit (#30), making it easy to do yourself.
Also, NEVER dyno test your bike with carbon fiber mufflers installed - the intense heat
and lack of cooling air can quickly cause the CF material to burn. Two Brothers Racing
does not provide a warranty for burned carbon fiber.
Aluminum Mufflers: Use an aluminum or mag wheel polish such as Mother’s to
restore the bright finish to factory spec.
Warranty
Two Brothers Racing products are intended for closed course competition purposes
only, and therefore are sold “as is” without warranty. Two Brothers Racing specifi-
cally disclaims any warranties of merchantability or fitness for a particular purpose
and disclaims all responsibility for consequential and incidental damages or any other
losses arising from the use of these products or parts.
10. Double check to make sure that all hardware is tightened.
11. Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the first time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you find a leak, a little high
temperature silicon sealant should fix it. After 50 to 100
miles, recheck all fasteners for tightness.
2005-06 Suzuki
BANDIT 1200
Slip-On Exhaust System with M-2 / M-5 Canister
Part #005-1450406V / 005-1450407V / 005-1450408V / 005-1450419V / 005-1450420V
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
Qty. Description Part Number
1 Bandit 1200 Muffler Canister M-2 or M-5 Varies
1 Rubber Lined Muffler Body Clamp Varies
1 V.A.L.E. Exhaust Tube Assembly 005-14501S
1 HARDWARE KIT 005-145-3
1 X-Ring Kit 005-7-2-3KIT
1 5mm Long Handle Ball end hex key 005-9-18610
4 Split Lock Washer 005-WL6
4 6x14mm Socket Head Cap Screw 005-SH614
1 Sticker Kit 015-10212