Two Brothers Racing Triumph Sprint ST 1050 User Manual

V.a.l.e, Sprint st 1050

Advertising
background image

V.A.L.E.

V a r i a b l e a x i s l o c k i n g e x h a u s t

TM

Parts List

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualified

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions first before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Installation Instructions

2006-10 Triumph

Sprint St 1050

V.A.L.E.™ Slip-on Exhaust System with M-5 Canister
Part # 005-1540419V, 005-1540420V

Qty.

Description

Part Number

1

M-5 Muffler Canister

Varies

1

Stainless Steel S-Bend Slip-On Tube

005-15501S

1

HARDWARE KIT

005-154-3

1

X-Lite™ V.A.L.E.™Retaining Ring

005-7-2-2

1

Licence Plate Bracket

005-17304B

1

Rear LED Tail Light /Plate Lights

005-17504LK

1

Turn Signal Marker Lights (Set of 2)

005-88T2

1

C-5/M-5 Oval Muffler Clamp Halves (set 2)

005-5C-6A

2

8x20mm Socket Head Cap Screw

005-SH820

4

M6 Split Lock Washer

005-WL6

1

Muffler Hanger Bracket LEFT

005-154-13L

1

Muffler Hanger Bracket RIGHT

005-154-13R

4

6x14mm Socket Head Cap Screw

005-SH614

2

8mm Nylon Insert Lock Nut

005-NN8

1

5mm Long Handle Ball end hex key

005-9-18610

1. Make sure the bike is completely cool before starting the

installation. Make sure the bike is secure on center stand

or ideally a service lift.

2. Remove the seat and handle:

3. Remove the rear cowling:

4. Remove the fender assembly:

5. Remove the plastic cover on fender assembly to expose

the brake and turn signal wires. Disconnect the brake

light wires:

6. Remove the OEM muffler:

7. To install the Two Brothers Racing Slip-on Exhaust

System: Attach the slip-tube with the X-Lite Ring™ to

the muffler using the 4 (four) 6x14mm socket head cap

screws and split lock washers provided. Leave loose for

now.

8. Attach the rubber lined muffler clamps and plate

brackets as shown to the muffler assembly using the

2 (two) 8x20mm socket head cap screws and nuts

provided. Leave loose for now.

9. Install muffler assembly using the OEM mounting bolts

and joint clamp.

Advertising