Two Brothers Racing Triumph Tiger 1050 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on a
centerstand or ideally a service lift.
2. Remove seat assembly.
3. Remove right side cowling hardware.
4. Remove OEM muffler bolt.
5. Loosen pipe joint clamp.
6. Remove muffler assembly.
7. Install X-Ring to slip-on tube.
8. Loosely attach muffler using the supplied 6x14mm
socket head cap screws and lock washers.
9. Install supplied mounting bracket using the OEM
hardware.
10. Install TBR muffler assembly.
11. Install rubber lined muffler support strap and attach using
the supplied 8x25mm flange bolt and provided nut.
12. Check alignment. Tighten pipe joint mount, and X-ring
bolts.
13. Double check your work to ensure everything has been
tightened and is properly installed.
14. Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the first time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you find a leak, a little high
temperature silicon sealant should fix it. After 50 to 100
miles, recheck all fasteners for tightness.
2007-09 Triumph
Tiger 1050
V.A.L.E. Slip-on Exhaust System
Part # 005-2590406V / 005-2590407V / 005-2590408V
Qty. Description Part Number
1 Muffler Canister Varies
1 Muffler Canister Clamp Varies
1 Slip-On Tube 005-25904S
1 HARDWARE KIT 005-259-3
1 X-Ring 005-7-2-2
1 8x40mm Flange Bolt 005-FB840
1 8mm Flange Nut 005-FN8
1 18mm Aluminum Spacer 005-S-18
1 Muffler Mounting Bracket 005-69B
1 5mm Long Handle Ball End Hex Key 005-9-18610
1 T20 Torx Screw Hex Key 005-9-15820
4 6x14mm Socket Head Cap Screw 005-SH614
4 M6 Split Lock Washer 005-WL6
1 TBR Sticker Kit 015-10212