Two Brothers Racing Yamaha R6 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions
first before starting installation. Make sure the motorcycle and exhaust system
are completely cool before starting the installation. Also, make sure the bike is
secure on a centerstand or ideally a service lift during installation. Be sure to
save all stock components for possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on a
centerstand or ideally a service lift.
2. Remove lower right fairing from the motorcycle.
3. Remove muffler inlet cover from front of muffler to
expose exhaust valve cables (noise reduction valve).
4. Remove cables from muffler and cable clamp from right
side rearset assembly.
5. Remove muffler joint clamp and muffler mounting bolt.
6. Remove muffler assembly. Also be sure to remove the
OEM retaining ring and gasket from the stock slip tube.
7. Remove bracket holding the brake reservoir to the frame.
8. Remove the noise reduction valve servo bracket from the frame.
9. Remove servo by pulling out from the right side of the
motorcycle and disconnect the cables. Disregard cables.
10. Remount the servo without the cables. This step is
necessary in order to keep an error code from being
displayed on the LCD screen.
11. Reinstall the brake reservoir.
(Continued on Page 2)
2006-07
Yamaha R6
V.A.L.E.™ Complete Exhaust System with M-2 Canister
Part # 005-1460106V / 005-1460107V / 005-1460108V
Qty. Description Part Number
1 R6 (06-07) Muffler Canister M-2 Varies
1 R6 (06-07) Slip-On Tube 005-14601S
1 R6 (06-07) Complete 4-2-1 Header Assy. 005-14601HK
1 Muffler Clamp Varies
1 HARDWARE KIT 005-146-3C
2 X-Ring (half) 005-7-2-3
1 R6 (06-07) Billet Mounting Bracket 005-146B
1 8x16mm Flange Bolt 005-FB816
1 66mm Barrel Clamp 005-27-66MSH
6 80mm Swivel Hook Spring 005-S80
1 5mm Long Handle Ball end hex key 005-9-18610
4 6x14mm Socket Head Cap Screw 005-SH614
1 Permatex Ultra Black Gasket Maker 031-P22072
4 6mm Split Washer 005-WL6