Two Brothers Racing Harley Davidson FL - Manual (Page 2)

Installation Instructions
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure
vehicle is completely cool before maintenance.
IMPORTANT - PLEASE READ CAREFULLY
Two Brothers Racing products are intended for closed course
competition purposes only.
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to
install this performance part, please consult with your local motorcycle
dealer. Read all instructions first before starting installation. Make
sure the motorcycle and exhaust system are completely cool before
starting the installation. Also, make sure the bike is secure on a center
stand or ideally a service lift during installation. Be sure to save all
stock components for possible use later.
Two Brothers Racing products are intended for closed course competition purposes
only, and therefore are sold “as is” without warranty. Two Brothers Racing specifically
disclaims any warranties of merchantability or fitness for a particular purpose and
disclaims all responsibility for consequential and incidental damages or any other
losses arising from the use of these products or parts. Not tested for use with OEM or
aftermarket accessories.
Warranty Information
9. Install TBR air filter and face plate. Tighten the five socket head cap
screws.
10. Apply anti-seize to threads of plug cap or v-stack and install hand tight.
Harley Davidson
FL Touring
Part # 034-387-01-V
Qty. Description Part Number
1 Comp-V Assembly 034-387-01-V
1 V-Stack 017C-103
1 Gasket 017C-122
2 Banjo Bolt 017C-117
2 Spacers 017C-104
6 O-Ring 017C-111
1 Thread Locker 031-P09178
1 Anti-Seize 031-P09175
1 Zip-Tie 005-ZT458B