Two Brothers Racing Honda Grom - Manual

IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a center stand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Installation Instructions
1. Remove seat.
2. Locate fender wires and unplug from main harness.
3. Remove the 4 bolts securing the OEM fender to motorcycle.
4. Remove fender assembly.
5. Cut OEM wires on fender assembly back 8” (inches) from the connector plug.
6. Attach turn signals and plate lights to TBR fender and attach using the OEM bolts and supplied 8mm flange nuts to
motorcycle.
7. Route wires through center hole and plug into main harness.
8. Attach plate light bolt wires to OEM wiring.
Red (TBR) to Green (OEM)
Black (TBR) to Yellow (OEM)
9. Attach TBR turn signals to OEM Wiring.
Solid Black (TBR) to Ground (using supplied ring connector)
Black/White (TBR) to Orange (OEM) LEFT
Black/White (TBR) to Blue (OEM) RIGHT
10. Use zip-tie tabs and zip-ties to keep wires away from exhaust.
11. Double check all your work.
12. Re-install seat.
Qty. Description Part Number
1 Fender Bracket 005-37404B
2 Lighted License Plate Bolt 005-8504LT2
1 Turn Signals (set of 2) 005-88T2
4 Butt Splice Connectors 005-BS1614
1 Ring Terminal 005-RT16-14
2 Zip Tie 005-ZT458B
2 Zip Tie Tab 005-ZTM4
2 8mm Flange Nut 005-FN8
1 TBR Sticker Kit 015-10212
Honda
grom
Fender Eliminator Kit
Part # 013-374
Parts List
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the
use of these products or parts.
BIKE
TURN SIGNALS
ground
right left
BOLT LIGHTS