Two Brothers Racing Kawasaki ZX-6R FE - Manual

IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Installation Instructions
1. Install TBR fender eliminator kit using the original bolts
and supplied nuts, the nuts will be inside the bike under
seat.
2. Attach turn signals and plate light bolts using the wire
splice connectors supplied to the correct wires in the
harness as shown in the Wiring Diagram.
3. Re-install seats and covers.
4. Double check all your work.
5. Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Also,
remove any plastic film from the name badge(s) and or
canister clamp(s). Run the bike and enjoy. It is normal
for some white smoke to appear the first time you start
the bike. This is packing/manufacturing oil from inside
the pipe burning off. Check for gaps or leaks. If you find a
leak, a little high temperature silicon sealant should fix it.
After 50 to 100 miles, recheck all fasteners for tightness.
Qty. Description Part Number
1 Fender Bracket 005-19904B
2 Lighted License Plate Bolt 005-8504LTZ
1 Turn Signals (set of 2) 005-88T2
6 Butt Splice Connectors 005-BS1614
1 Zip Tie 005-ZT458B
1 Zip Tie Tab 005-ZTM4
4 6mm Flange Nut 005-FN6
1 TBR Sticker Kit 015-10212
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM 2009 Kawasaki
ZX-6R
Fender Eliminator Kit
Part # 013-241
Parts List
WIRING DIAGRAM
Lef
t Tu
rn
Sig
nal
(Gr
ey
con
nec
tor
)
R
ed
Plate Lights
Righ
t Turn
Sign
al
(Blac
k con
necto
r)
Wiring Harness
Blac
k/Y
ellow
Red
Blac
k
Blac
k
Red
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the
use of these products or parts.