Two Brothers Racing Can-Am Spyder Spyder RS User Manual
Page 4
Advertising
ITBR001-283-A.02 www.twobros.com
2011-2014 CanAm Spyder RT - 4
8. Using the supplied velcro, secure the Juicebox Pro unit in place under the seat as
shown in Figure D.
9. Route the Juicebox Pro harness down the left side of the vehicle and go towards
the throttle bodies.
10. Remove the mounting bolt for the MAP sensor on the left side of the throttle
bodies.
This allows access to the injector.
11. Unplug the stock wiring harness from the injector as shown in Figure F.
FIG
.D
FIG
.E
FIG
.F
Advertising
This manual is related to the following products: